The Chamber of Commerce of Dolenjska and Bela krajina has recognized our efforts in the field of innovation this year as well.
In collaboration with REM d.o.o., we have been awarded the silver award for the innovation: Living unit with intelligent comfort management and high sound insulation
More information about the Innovation event can be found at the following link:
https://www.gzdbk.si/si/aktualno/novice/?id=5624&l=2022
We held the official opening of our new business premises on September 2 in a very pleasant atmosphere. We invited business partners from Slovenia and abroad, mayors from various municipalities and guests of honor from Slovenia and abroad, as well as our friends and colleagues. Together we were able to enjoy a pleasant cultural programme, performed by the Šentjernej Municipality Wind Orchestra, the Šentjernej Octet, the children of the Šentlora folklore group from the Šentjernej Primary School and other musical and dance points. Guests not only enjoyed the cultural programme, but also the culinary programme, where they could choose from the offer of various local caterers and winemakers.
You can see more from the attached photos.
👦👧💭 “Mum/Dad, what do you do at work?”
We’ve probably all heard this same question from our children before …
To introduce our work to our loved ones, we organised a meeting for family members and gave them a guided tour of the company’s departments.
The little ones were thrilled to see the products coming out of their parents’ hands and they were overjoyed to sit in the same chair as the role model in their lives.
The second part of the gathering took place outside, where we could enjoy good food and refreshments. Of course, it was not to be forgotten:
🏰🎈 Bouncy castle and slides
🎩🐇 The Wizard
🚗🕹️ Racing car
🚒💦 Water surprise
We had a great time and we’re all glad we had the chance to get even closer. 👨👩👧👦
Our location for the next three days is Nuremberg, Germany – Embedded World Conference.
Nina Rajar, Neja Jedlovčnik, Matej Slapšak and Primož Zajec are already waiting for you to have a constructive debate about your challenges and our solutions.
Hall 5, Booth 5-353.
We look forward to your visit.
On Saturday, 28.5.22, we put work aside and all the employees of L-Tek d.o.o. went to Javorovica. A few persistent employees cycled all the way from Šentjernej, despite the rain. The social gathering was held in a pleasant and relaxed atmosphere. Our taste buds were catered for by the L-Tek masterchef team, who prepared more than excellent food at a high level. Not even the strudel was missing 😊
We hope to repeat this or similar gatherings in the near future.
The Chamber of Commerce of Dolenjska and Bela krajina has recognized our efforts in the field of innovation this year as well.
We received a silver award for innovation: A wireless sensor for measuring wood moisture.
The WOrMS (wood moisture sensors) unit is a tool that deepens your knowledge of the behavior of wood over time. This provides various companies producing wood products with tools that, with additional knowledge and appropriate improvements, offer the end customer a higher quality product and a step ahead of the competition. The sensor unit measures the wood moisture via two screws, which are also used for attaching the sensor. The battery-powered sensor allows for easy installation. The data is available online to different users or to further developed applications intended for the end user.
More information about the Innovation event can be found at the following link:
https://www.gzdbk.si/si/aktualno/novice/?id=4961&l=2021
We are excited to be able to say that we will soon be moving to a new business premises.
We will also gradually expand our team and if you see yourself in sales, purchasing, technology, quality or R&D you are kindly invited to get in touch with us.
As part of the project “Combining simulations, machines and tools to optimize the production process of polymer products” (CoSiMa), project partners at Kolektor Orodjarna in Postojna performed experimental testing for a drug push product with selected material from the PA66 family with a 35% share of glass fibres, where we analysed in addition to process parameters, also the dynamic behaviour of the injection moulding machine. These experiments are intended to support further activities to optimize the injection moulding process by allowing automatic changes to the adjustment settings on injection moulding machines. We will also perform dimensional measurements and accompanying simulations of filling and shrinking on the injection moulded pieces, so as to evaluate the obtained results according to the settings production data, which will also be analysed. Our future aim is to continue with experimental testing with other materials as well as on other products.
Project is co-financed by the Republic of Slovenia, Ministry of Education, Science and Sport and the European Union from the European Regional Development Fund.
We would like to invite you to join us at our DIGITAL e-booth at the Embedded World Conference, which is taking place from 1 to 5 March 2021. This leading international world fair is focused exclusively on embedded technologies and reflects the trends in this sector. We are going there to present our piece of the puzzle in the field of embedded technology, electronics manufacturing and medical devices designs.
Feel free to make an appointment with us!
For more information visit: https://www.embedded-world.de/en
We look forward to your visit.
With the implementation of the project “Combining simulations, machines and tools to optimise the production process of polymer products” (CoSiMa), the project partners have made significant progress with the activities carried out thus far. We have created the first hardware and software prototypes of products and prototype tools for experimental testing, which are intended to support further activities for the optimisation of the injection moulding processes with which we will be able to automatically monitor the adjustment settings on injection moulding machines.
The latter depend on the experience of the injection molding machine operator and the rather demanding task given the complexity of the injection molded product. For the successful integration and management of individual smart mechatronic tools within the production cycle of injection moulding, we are preparing an optimisation cycle of the system, which enables control over optimal process parameters and the activation of changes on the injection moulding machine. We have also included toolmakers and plastic mass producers in the process of developing the connection of simulations, machines and tools.
During the project’s two-year period, we have focused on the development and production of special sensor electronics to be installed on the injection moulding tools, data exchange between the injection moulding machine and the injection moulding simulation program, modelling of influential factors in the injection moulding process, analysis of the effect of the production space’s air temperature on the temperature in the tool cavity, and analysis of flow conditions. Despite the coronavirus pandemic and the Covid-19 regulations, we have managed to carry out most of our planned activities in the previous year. We performed a holistic characterization of material properties for the selected thermoplastic polymeric materials, the results of which will come in useful in mass industrial testing of the optimisation system. In the future, we will perform a larger number of tests of the optimisation system with various materials on the constructed and manufactured prototype injection tools, a plan already set last year. This year, in addition to extensive testing, we are also waiting for the validation of the optimisation system, where we will test individual functionalities.
Project is co-financed by the Republic of Slovenia, Ministry of Education, Science and Sport and the European Union from the European Regional Development Fund.
